PRODUCT SAFETY DATA SHEET ENGINEERED HARDWOOD FLORING

1 – CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

Product Name:                   Hard Wood Flooring
Chemical Name:                 Engineered Wood Plank Flooring
Product Use/Class:             Floor Covering
Company Information:      Diamond Living, LLC

6606 FM 1488
STE 148 #353
Magnolia, TX 77354
281.766.1600
www.dlfloors.com

2 – COMPOSITION / INFORMATION ON INGREDIENTS
None per OSHA Standard 29 CFR 1910.1200 & SARA Title III, Section 313.

3 – HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW:
Form:      Solid, wood plank flooring
Color:      Natural tones
Odor:      No Appreciable Odor
WARNING STATEMENTS:
Wood dust (an OSHA listed carcinogen) may be generated while cutting, sanding, etc. Proper
PPE, such as respiratory protection, is recommended to be used whenever cutting, machining or
working the product is required.
POTENTIAL HEALTH EFFECTS
Likely Routes of Exposure:
Eye Contact:    Not an expected route of exposure.
Skin Contact:   Some planks may have wood dust on them which may produce mild irritation upon skin contact. Ordinary good measures of personal hygiene will minimize exposure.
Inhalation:      This item is a solid material. Become familiar with inhalation precaution statements for adhesive products and while cutting planks (dust may be generated while cutting). Some planks may also contain loose wood dust which could be inhaled. Ordinary cleaning measures
and good personal hygiene will minimize exposure.
Ingestion:    Small amounts, if swallowed, are not expected to cause injury.
Chronic:      No known chronic effects.
Other:         This product is an article or building product and is considered to be relatively non-toxic in intact form, presenting no known hazard to people, except as noted under thermal decomposition byproducts and under “Warning Statements” concerning wood dust. Refer to
Section 11 for toxicological information.

4 – FIRST AID MEASURES
If in Eyes:   Flush with cool water, like any non-hazardous solid.
If on Skin:   If skin is irritated from handling product (transitory mechanical dermatitis), wash thoroughly with soap and water. Seek medical attention if condition persists.
If Inhaled:   Move out of dusty area and into clean, fresh air. If adverse reactions to adhesives or other sundry installation chemical products should occur, move to fresh air and seek medical assistance.
If Swallowed:   Seek medical assistance if a considerable amount is swallowed.

5 – FIRE FIGHTING MEASURES
Flash Point: Not Available
Lower Explosive Limit (LEL) %:                   Not Available
Upper Explosive Limit (UEL) %:                  Not Available
Auto-Ignition Temperature:                       Not Available
OSHA Flammability Classification:             Not Available
Hazardous Products of Combustion:         Protect self from combustion products and fumes.
Extinguishing Media:   Use foam, C02, water spray, dry chemical extinguishing agent or other appropriate media for wood and/or surrounding fire.
Unusual Fire and Explosion Hazards:   None.
Fire Fighting Equipment:    Self-contained breathing apparatus and full protective clothing.
Miscellaneous Advice:      ASTM E-648 CRF value greater than 0.45 W/Square cm.
Refer to Section 10 for additional information.

6 – ACCIDENTAL RELEASE MEASURES
Personal Precautions:    This is a non-hazardous product in intact form. Take precautions not to inhale generated dust.
Methods for Clean-up:   Due to solid, inert properties, scrap pieces may simply be swept up and disposed of as a solid, non-hazardous waste per local, state and federal regulations.
Refer to Section 13 for disposal information.
Refer to Sections 14 and 15 for re portable quantity information.

7 – HANDLING AND STORAGE
Handling:    Install with adequate ventilation (based on the requirements of the installation adhesives). Wash thoroughly after handling and before eating, drinking and storage.
Storage:    Consult Diamond Living, LLC Installation Instructions for additional information on handling and storage.

8 – EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering Controls:    Install in well-ventilated areas.
Respiratory Protection:    Not normally required. Protection may be required if excessive dust is generated, or if adhesives or other sundry installation chemical products so warrant.
Eye Protection:    Not normally required, unless adhesives or other sundry installation chemical products so warrant.
Hand and Skin Protection:    Not normally required, unless adhesives or other sundry installation chemicals so warrant.
Other Protective Equipment:    Not normally required, unless adhesives or other sundry installation chemicals so warrant.
Hygienic Practices:    Wash hands before eating, smoking or using toilet facilities. Do not smoke in any chemical handling or storage area. Food or beverages should not be consumed anywhere this product is handled or stored. Wash thoroughly after handling.

9 – PHYSICAL AND CHEMICAL PROPERTIES
Appearance:            Wood plank flooring
Specific Gravity:      Nominal 0.6 (Water = 1.0)
Physical State:         Wood plank
Odor:                       No appreciable odor
Water Solubility:      Negligible

10 – STABILITY AND REACTIVITY
Conditions to Avoid:               Stable
Materials to Avoid:                 Stable
Stability:                                  Stable
Hazardous Reactions:             Will not occur
Hazardous Polymerization:     Will not occur
Hazardous Decomposition Products:    Thermal decomposition in the presence of air may yield carbon dioxide and carbon monoxide, or other irritating fumes.

11 – TOXICOLOGICAL INFORMATION
Product LD50 (Oral):                                    N/A
Product LD50 (Dermal):                               N/A
Product LC50:                                              N/A
Immediate (Acute) Effects:                          None known
Delayed (Subchronic & Chronic) Effects:    None known

12 – ECOLOGICAL INFORMATION
No ecological impact study information is available on this product.

13 – DISPOSAL CONSIDERATIONS
US EPA RCRA Status:            N.A.
Disposal Considerations:    N.A.
Disposal Method:                N.A.
Miscellaneous: Dispose of as a non-hazardous solid in accordance with local, state and federal guidelines

14 – TRANSPORT INFORMATION
The information provided in this section is for information only. Please apply the appropriate
regulations to properly classify your shipment for transport.
DOT Proper Shipping Name:     Not regulated.
DOT Hazard Class:                      Not regulated.
DOT UN/NA Number:                Not regulated.
Packing Group:                          Not regulated.
Product Emergency:                  Diamond Living, LLC 281.766.1600

15 – REGULATORY INFORMATION
Country of Origin:                    China
U.S. Federal Regulations:           N/A
SARA Section 311, 312:              N/A
SARA Section 313:                     N/A
Toxic Substances Control Act:  N/A
Inventory Status:                      N/A
Export Notification:                   N/A
Other:                                      N/A

16 – OTHER INFORMATION
This material is a finished floor covering product. Diamond Living, LLC provides a Product Safety Data Sheet for all finished floor covering products.
Product Safety Data Sheets (PSDS) are provided for finished floor covering products based on the “article exemption” found in 29 CFR 1910.1200 (b) (6) (v). An article is defined as: “a manufactured item other than a fluid or particle: (i) which is formed to a specific shape or design during manufacture; (ii) which has an end use function(s) dependent in whole or in part
upon its shape or design during end use; and (iii) which under normal conditions of use, does not release more than very small quantities, e.g. minute or trace amounts of a hazardous chemical and does not pose a physical hazard or health risk to employees.”
There are a wide variety of installation techniques and safe handling guidelines in Diamond Living’s Installation Instructions. Because many floor installations require adhesives, it is recommended that the user review the manufacturer’s recommendations for adhesive spread rate, open time, proper ventilation, safe installation practices, etc. during installation.
Disclaimer: Although the information and recommendations set forth herein (hereinafter “Information”) are presented in good faith and believed to be correct as of the date of hereof, the company makes no representations as to the completeness or accuracy thereof. Information is supplied upon the condition that the persons receiving same will make their own determination as to its suitability for their purposes prior to use. In no event will the company be responsible for damages of any nature whatsoever resulting from the use of or reliance upon Information.
NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED, OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR OF ANY OTHER NATURE ARE MADE HEREUNDER WITH RESPECT TO INFORMATION OR THE PRODUCT TO WHICH INFORMATION REFERS.

Legend:
N.E. –    Not Established
S –     Skin
N.A. –    Not Available
ppm –    Parts per Million
N/A –    Not Applicable
° F. –    Degrees Fahrenheit
C –      Ceiling (Exposure Levels)
° C. –    Degrees Centigrade
PEL –    Permissible Exposure Limits
STEL –    Short-Term Exposure Limit
OEL –    Occupational Exposure Limit
CIH –    Certified Industrial Hygienist
TSCA –    Toxic Substances Control Act
TWA –    Time Weighted Average
NFPA –    National Fire Protection Association
TLV –    Exposure Limits Developed by ACCIH
MSHA –    Mine Safety and Health Administration
NIOSH –   National Institute for Occupational Safety
OSHA –   Occupational Safety and Health Administration
HAZCOM –   Hazard Communication Standard (29CFR1910.1200)
ACGIH –   American Conference of Government Industrial Hygienists
CERCLA –   Comprehensive Environmental Response, Comprehensive and Liability Act.




WATER PROOF LUXURY-VINYL PLANK WITH WATER PROOF CORE(LVP-WPC)

Finally, a beautiful product that is easily installed in your water prone areas. It is a warm, durable, soft under your foot, impact and scratch resistant, water proof floor.

WARRANTIES

Residential:        Lifetime Limited Wear Warranty

Lifetime Limited Structural Integrity Warranty
Lifetime Limited Waterproof Warranty

Commercial:       15 Year Limited Wear Warranty

INSTALLATION

Grade Level:      Above Grade

On Grade
Below Grade

Method:          Floating
Radiant Heated Floor:Yes. Can be installed over radiant floor heating system

SPECIFICATIONS

Construction:       UV Protective Coating

0.5 mm (20 mils) Virgin PVC Wear Layer
Décor Layer
1.5 mm filled PVC Layer
5.0 mm WPC core
1.5 mm Cork

Dimensions:

Thickness 8 mm        8mm     nominal
Width 9 3/8 in.           7 in.      nominal
Length 60 in.             48 5/8 in.     nominal
Surface Edging:        Micro beveled; all sides
Surface Texture:        Hand-scraped; Embossed; Distressed.

PACKAGING
Planks per carton:      6
Sq. Ft. per Carton:      24.4      nominal
Cartons per pallet:      60

PERFORMANCE

Sound Transmission Class:
.
Slip Resistance
Curling from Heat
Abrasion Resistance:
Light Stability:
Formaldehyde Emission
Residual Indentation
Density
Castor Chair Resistance
Critical Heat Flux

STC 62
IIC 65
CLASS DS
Pass
AC5
6 or Above
E1
Pass.
95g/cm3
Pass
Class B

ASTM E413 -10, ASTM E90-09,
ASTM E492-09, ASTM E989-06
EN 13893
EN 434
EN 13329
ISO 105-B02
EN 717-1
EN 433
ASTM D6111-13a
EN 425
EN ISO 9239-1

COMPLIANCE
CA Section 01350       Compliant
CARB II                        Compliant
CA Proposition 65      Compliant